3.7.3 Disk Management
You can check Disk status, add Network Disk and set Recycle Mode here.
Diak Mangement
Property: R/W and Read-only are available for this option.
![](../images/local-operation/storage/disk-management/disk-management.jpg)
Network Disk
NAS (Network-Attached Storage) should be available within the network and properly configured to store the recorded files and snapshots. You can click and then input corresponded NAS information to add NAS.
- NAS with NFS format is the only type for network disk adding.
- It’s recommended to use Hard Disk rather than Network Disk.
![](../images/local-operation/storage/disk-management/disk-management2.jpg)
Edit the Property by clicking . After that the storage device will be ready.
![](../images/local-operation/storage/disk-management/disk-management3.jpg)
HDD Type: RAID means RAID, NAS means network attached storage while LOCAL means normal disk mode.
General Settings
Recycle Mode: You can enable or disable Recycle Mode for all storage devices.
eSATA Function: Both storage and backup are available.
![](../images/local-operation/storage/disk-management/general-settings.png)