Add devices individually

Restrictions

Click here to check the left number of devices that can be added to your account.

Prerequisites

You have collect the device's SN or EUI.
You have upgraded the firmware version of device model to a supported version.
Note: You need to reboot the device after the SN is added to platform.
If you want to apply custom settings to devices that support RPS, you need to create custom Profile templates for the devices.

Procedure

Log in to Milesight Development Platform.
On the top bar, select the Device tab.
Click Add.
In the pop-up window, fill in the basic information.
1. In the SN/DevEUI field, enter the device's SN (Serial Number) or EUI (Extended Unique Identifier).
  If the SN/EUI is correct, the system automatically detects the device type.
2. In the Name field, specify a name to help you identify this device.
3. Optional: Enter the device description.
If this device supports RPS, you can configure the RPS for it.
1. Turn on Enable RPS Service After Added.
2. In the Configuration File drop-down list, select the desired configuration file to apply settings to the device.
  Note:
  - The listed files include the default Config template and the custom Config templates you created.
  - If you require device to receive configurations from configuration URL, see Add RPS Records Individually.
3. Click Custom to edit the selected file as needed.
Click Confirm.

Result

The device is added to Milesight Development Platform, the Status column displays the connectivity status and the RPS Status column displays the RPS activate status.

The device's initial connectivity status is displayed as Disconnected, which will be automatically transitioned to Online upon the transmission of the device's heartbeat or data through the platform.

A RPS record will be generated when RPS status is Activate.

Note: If you only require RPS for this device and set it NOT to connect to Milesight Development Platform, please go to RPS tab to add the device RPS record.