Stop or Start Config Task

This topic describes how to stop or start a total Config task or a sub Config task.

Stop or Start a Total Config Task

You can stop a Config task if the task status is Waiting or Processing, and start a Config task if the task status is Completed and includes sub task status Failed or Stopped.
Procedure
  1. Log in to Milesight Development Platform.
  2. On the top bar, click Task Center, then select the Config Task tab.

  3. In the Operation column of the desired Config task, click Stop icon.
    Note: this operation will not work if the task status of all sub task statuses are not Failed or Stopped.

  4. In the Operation column of the desired Config task, click and select Rerun.

Result
All device tasks which the status are Waiting under this Config task will be stopped; all device tasks which the status are Failed or Stopped under this Config task will be started.

Stop or Start a Sub Config Task

You can stop a sub config task if the task status is Waiting, and start a sub config task if the task status is Stopped or Failed.
Procedure
  1. Log in to Milesight Development Platform.
  2. On the top bar, click Task Center, then select the Config Task tab.

  3. In the Operation column of the desired Config task, click Details icon.

  4. In the Operation column of the desired device, click Stop icon.

  5. In the Operation column of the desired device, click Rerun icon.

Result
The configuration provision of the desired device will be stopped or started.