Live Video

After logging in the network camera web GUI successfully, user is allowed to view live video as follows.

Table 1. Description of the buttons

No.	Parameter	Description
1	Live Video	Click to access the live view page.
2	Playback	Click to access the playback page.
3	Settings	Click to access the configuration page.
4		Click to access the LPR Mode.
5		Click to select system language.
6		Display the user name and click to logout.
7		Choose the stream (Primary/Secondary/Tertiary) to show on the current video window.
8	Recording	When recording, the icon appears.
9	Alarm	When an alarm of Motion Detection was triggered, the icon appears.
10	Alarm	Except for the kinds of alarms above, when other alarms were triggered, the icon appears.
11	/ Stop/Play	Stop/Play live view.
12	Snapshot	Click to capture the current image and save to the configured path. The default path is: C:VMS\+-1\ IMAGE-MANUAL.
13	/ Start/Stop Recording	Click to Start Recording video and save to the configured path. The default path is C:VMS\+-1\MS_Record. Click again to Stop Recording.
14	Digital Zoom	When enabled, you can zoom in a specific area of video image with your mouse wheel.
15	Manual Output	Manually trigger Camera Alarm Output.
16	Window Size	Click to display images at a window size.
17	Full Screen	Click to display images at full-screen.
		Zoom: Adjust the Zoom length of the lens. Note: Only work when your camera is equipped with motorized lens.
		Focus-/Focus+: Adjust focus of the lens. Note: Only work when your camera is equipped with motorized lens.
		Focus Speed: To adjust the speed of focus. Note: Only work when your camera is equipped with auto focus lens.
		Zoom-/Zoom+: Click to zoom in and zoom out. Note: Only work when your camera is equipped with auto focus lens.
		Focus-/Focus+: Click to focus near or far of the lens. Note: Only work when your camera is equipped with auto focus lens.
		Lens Initialization, Auxiliary Focus and Auto Iris. Note: The Auto Iris is turned on by default when your camera is equipped with auto focus lens. The Auto Iris support turn on/off when your camera is equipped with P-Iris.
		Brightness: Adjust the Brightness of the scene.
		Contrast: Adjust the color and light contrast.
		Saturation: Adjust the Saturation of the image. Higher Saturation makes colors appear more "pure" while lower one appears more “wash-out”.
		Sharpness: Adjust the Sharpness of image. Higher Sharpness sharps the pixel boundary and makes the image looks “more clear”.
		2D DNR/3D DNR: Adjust the noise reduction level.
		Default: Restore brightness, contrast and saturation to default settings.