3.2 Configuration Flow

The configuration flow of Road Traffic Management Camera is shown in the following figure.



More configuration details is shown in the following table.

Table 1. Description of flow
Configuration Description Reference
Network Connection Connect the network camera. You can set the camera over the LAN or dynamic IP connection. Setting the Camera over the LAN
Accessing the Network Camera Accessing from IP address, web browser and Milesight back-end software are available. Assigning an IP Address
Configure Basic Parameters After login the camera, you can adjust the video/image/audio/network parameters as needed. Video

Image

Configure Advanced Functions Configure LPR-related settings and other advanced functions. General