Live Video
After logging in the network camera web GUI successfully, user is allowed to view live video as follows.
No. | Parameter | Description |
---|---|---|
1 | Live Video |
Click to access the live view page. |
2 | Playback |
Click to access the playback page. |
3 | Settings | Click to access the configuration page. |
4 | Click to access the LPR Mode. | |
5 | Click to select system language. | |
6 | Display the user name and click to logout. | |
7 | Choose the stream (Primary/Secondary/Tertiary) to show on the current video window. | |
8 | Recording | When recording, the icon appears. |
9 | Alarm |
When an alarm of Motion Detection was triggered, the icon appears. |
10 | Alarm |
Except for the kinds of alarms above, when other alarms were triggered, the icon appears. |
11 | / Stop/Play |
Stop/Play live view. |
12 | Snapshot |
Click to capture the current image and save to the configured path. The default path is: C:VMS\+-1\ IMAGE-MANUAL. |
13 | / Start/Stop Recording |
Click to Start Recording video and save to the configured path. The default path is C:VMS\+-1\MS_Record. Click again to Stop Recording. |
14 | Digital Zoom |
When enabled, you can zoom in a specific area of video image with your mouse wheel. |
15 | Manual Output |
Manually trigger Camera Alarm Output. |
16 | Window Size |
Click to display images at a window size. |
17 | Full Screen |
Click to display images at full-screen. |
Zoom: Adjust the Zoom length of the
lens. Note: Only work when your camera is equipped with motorized
lens. |
||
Focus-/Focus+: Adjust focus of the
lens. Note: Only work when your camera is equipped with motorized
lens. |
||
Focus Speed: To adjust the speed of focus.
Note: Only work when your camera is equipped with auto focus
lens. |
||
Zoom-/Zoom+: Click to zoom in and zoom
out. Note: Only work when your camera is equipped with auto focus
lens. |
||
Focus-/Focus+: Click to focus near or far of
the lens. Note: Only work when your camera is equipped with auto focus
lens. |
||
Lens Initialization, Auxiliary Focus and Auto Iris. Note:
|
||
Brightness: Adjust the Brightness of the scene. | ||
Contrast: Adjust the color and light contrast. | ||
Saturation: Adjust the Saturation of the image. Higher Saturation makes colors appear more "pure" while lower one appears more “wash-out”. | ||
Sharpness: Adjust the Sharpness of image. Higher Sharpness sharps the pixel boundary and makes the image looks “more clear”. | ||
2D DNR/3D DNR: Adjust the noise reduction level. | ||
Default: Restore brightness, contrast and saturation to default settings. |