RTSP

Parameters | Function Introduction |
---|---|
RTSP Port |
The port of RTSP, the default is 554. |
Playback Port |
Playback Port The port of playback, the default is 555. Note: Port 0 means closing playback function.
|
RTP Packet |
There are Better Compatibility and Better Performance two options, if your camera’s image mess up, please switch this option. |
Multicast Group Address |
Support multicast function. |
QoS DSCP |
The valid value range of the DSCP is 0-63. |
![]() |
Save the configuration. |
Stream | URL |
---|---|
Primary Stream | rtsp://IP:RTSP Port/main |
Secondary Stream | rtsp://IP:RTSP Port/sub |
Tertiary Stream | rtsp://IP:RTSP Port/third |
Note:
- DSCP refers to the Differentiated Service Code Point; and the DSCP value is used in the IP header to indicate the priority of the data.
- A reboot is required for the settings to take effect.