DDNS

DDNS allows you to access the camera via domain names instead of IP address. It manages to change IP address and update your domain information dynamically. You need to register an account from a provider.

Note: For more details about how to set DDNS, please refer to https://milesight.freshdesk.com/a/solutions/articles/69000643406.


You can choose “ddns.milesight.com” as provider for DDNS. After enabling it, you can access the device via the URL “http://ddns.milesight.com/MAC address”.

Table 1. Description of the buttons

Parameters

Function Introduction

Enable DDNS

Check the checkbox to enable DDNS service.

Note: Recommend to enable and configure UPnP ports which can be used directly in DDNS.

Provider

Get support from DDNS provider: ddns.milesight.com, freedns.afraid.org, dyndns.org, www.no-ip.com, www.zoneedit.com.

You can also customize the provider for DDNS.

Hash

A string used for verifying, only for "freedns.afraid.org".

User name

Account name from the DDNS provider, unavailable for "freedns.afraid.org".

Password

Account password, unavailable for "freedns.afraid.org".

Host name

DDNS name enabled in the account.

Status Display DDNS running status.
Save the configuration.
Note:
  • Please do the Port Forwarding of HTTP Port and RTSP Port before you use Milesight DDNS.
  • Make sure that the internal and the external port number of RTSP are the same.