8.2.2.4 802.1x

The IEEE 802.1X standard is supported by the network cameras, and when the feature is enabled, the camera data is secured and user authentication is needed when connecting the camera to the network protected by the IEEE 802.1X.

Table 1. Description the Buttons
Parameters		Function Introduction
Enable		Start or stop using 802.1x certification.
Protocol		Choose the protocol, EAP-MD5 and EAP-TLS are available.
EAP-MD5	Eapol Version	This version number helps ensure compatibility between devices implementing different versions of the EAPOL protocol. Version 1 and version 2 can be chosen.
	User Name	EAP-MD5 encryption account name.
	Password	EAP-MD5 encryption account password.
	Confirm Password	Re-enter the EAP-MD5 encryption account password.
EAP-TLS	Identify	EAP-TLS encryption account name. Note: Please insert letters/digits/space/other standard characters,and make sure the amount of identify not more than 32.
	Eapol Version	Version 1 and version 2 can be chosen.
	Client Certificate	Upload and set the client certificate.
	Private Key	The key certificate in the client certificate.
	Private-key Password	Enter the password of the client certificate Note: Please insert letters/digits/other standard characters, and make sure the amount of password not more than 32
	CA Certificate	Upload and set the CA certificate.