3.1.1 Account Setting

Note: Only the NVR firmware version xx.9.0.3 or above supports account activation.

Step1. Set password to active admin account.



Note:
  1. Password must be 8 to 32 characters long.
  2. Password must contain at least one number and one letter.
  3. You can also choose the system language on the activation interface.

Step2. Set security questions which are used for resetting password to finish account setting.

10 questions are provided, you can select any one to set answer. Beside, customized question is available.

If you skip this step, you can also set it again in Setting -> User interface.