EM320-TH – Configurable Properties
You can update a device's settings by modifying the configurable properties of its TSL model via API. This topic provides the configurable parameters for EM320-TH TSL model, their descriptions, and how to use them.
Usage
- Have an overview of the configurable properties and their default values of EM320-TH.
- Copy the example code and remove the comments and parameters that do not require modification.
- Edit the desired properties according to the detailed properties
description.Note: Make sure that the edited example code complies with the JSON format requirements.
- Use the edited example code as the body parameters of Update Device Properties Incrementally.
Configurable properties
The following code represents all configurable properties in the EM320-TH TSL model, along with their default values.
- Click a property to view its detailed description and valid values.
- Configure the example code as needed, then use it as the body parameters of Update Device Properties Incrementally to save time and effort.
{
"properties": {
"reporting_interval": 600, // The interval for data reporting (second).
"collecting_interval": 60, // The interval for collecting data (second).
"data_storage_enable": false, // Do NOT allow the device to store data.
"retransmission_enable": false, // Disable data retransmission.
"retransmission_interval":{ // The interval for data retransmission (second).
"interval":600
},
"retrival_interval":{ // The interval for data retrieval (second).
"interval": 60
},
"threshold_parameter":{ // Disable temperature alarm.
"threshold_condition": 0,
"threshold_min": 0,
"threshold_max": 0
}
}
}
Description
The following table provides the description and valid values for the configurable properties of EM320-TH.
Parameter | Type | Description | |
---|---|---|---|
reporting_interval | Integer |
Specify the interval for data reporting (Unit: Second).
|
|
collecting_interval | Integer |
Specify the interval for collecting data (Unit: Second).
|
|
data_storage_enable | Boolean |
Decide whether to allow the device to store data. Valid value:
|
|
retransmission_enable | Boolean |
Decide whether to enable data retransmission, which allows the device to log time point of network disconnection periodically resend the accumulated data during the disconnection period upon reconnection. Valid value:
|
|
retransmission_interval | Struct |
Note: This setting ONLY takes effect
when retransmission_enable is set to
The interval for data
retransmission.true . |
|
interval | Integer |
Specify the interval for data retransmission (Unit:
Second).
|
|
retrival_interval | Struct |
The time interval for data retrieval. |
|
interval | Integer |
Specify the time interval for data retrieval (Unit:
Second).
|
|
threshold_parameter | Struct |
Temperature alarm settings. |
|
threshold_condition | Enum |
Specify the conditions for triggering the temperature alarm. Valid value:
|
|
threshold_min | Float |
Specify the minimum threshold for temperature alarm (Unit: °C).
|
|
threshold_max | Float |
Specify the maximum threshold for temperature alarm (Unit: °C).
|