UG67 Default Profile

This topic provides the default Profile template of UG67.

Background information

When you add and apply Auto Provision for a device, a complete Profile template is required. A Profile template includes all configurable settings for the device, however, only the active parameters will be applied for Auto Provision. This topic outlines the active parameters within the default Profile template, helping you determine if the default template is suitable for your Auto Provisioning needs.

Note: If the default Profile template does NOT meet your needs, you can create a custom Profile template.

Default Profile template

{
    "version": "v1.0",
    "values": [
        {
            "key": "dm_enable",      // Allow this device to connect with Milesight platform for remote management and configuration.

            "value": 1
        },
        {
            "key": "dm_type",    // Connect this device to Milesight Development platform.
            "value": 0
        },
        {
            "key": "dm_mip_addr",    // The server address of Milesight Development Platform.
            "value": "https://milesight.com"
        },
        {
            "key": "dm_dh_addr",
            "value": ""
        },
        {
            "key": "autop_enable",    // Enable auto provision for this device.
            "value": 1
        },
        {
            "key": "region_freq",    // Select supported frequency as EU868.
            "value": 0
        },
        {
            "key": "pkt_enable",    // Enable the gateway packet forwarding destination.
            "value": 1
        },
        {
            "key": "pkt_type",    // Select packet forwarder type as Milesight Development Platoform LNS.
            "value": 7
        },
        {
            "key": "semtech_addr",    //Set semtech server address as  eu1.cloud.thethings.network.
            "value": "eu1.cloud.thethings.network"
        },
        {
            "key": "semtech_up_port",    // 
            "value": 1700
        },
        {
            "key": "semtech_down_port",    // 
            "value": 1700
        },
        {
            "key": "station_lns_uri",    // 
            "value": ""
        },
        {
            "key": "station_lns_trust",    // 
            "value": "",
            "fileSize": "",
            "crc32": "",
            "md5": ""
        },
        {
            "key": "station_lns_crt",    // 
            "value": "",
            "fileSize": "",
            "crc32": "",
            "md5": ""
        },
        {
            "key": "station_lns_key",    // 
            "value": "",
            "fileSize": "",
            "crc32": "",
            "md5": ""
        },
        {
            "key": "station_gps_enable",
            "value": 1
        },
        {
            "key": "station_cups_uri",    // 
            "value": ""
        },
        {
            "key": "station_cups_trust",    // 
            "value": "",
            "fileSize": "",
            "crc32": "",
            "md5": ""
        },
        {
            "key": "station_cups_crt",    // 
            "value": "",
            "fileSize": "",
            "crc32": "",
            "md5": ""
        },
        {
            "key": "station_cups_key",    // 
            "value": "",
            "fileSize": "",
            "crc32": "",
            "md5": ""
        },
        {
            "key": "chirpstack_addr",    // 
            "value": ""
        },
        {
            "key": "chirpstack_port",    // 
            "value": 1883
        },
        {
            "key": "chirpstack_crd",    // 
            "value": 0
        },
        {
            "key": "chirpstack_name",    // 
            "value": ""
        },
        {
            "key": "chirpstack_pwd",    // 
            "value": ""
        },
        {
            "key": "chirpstack_tls",    // 
            "value": 0
        },
        {
            "key": "chirpstack_mode",    // 
            "value": 0
        },
        {
            "key": "chirpstack_ca",    // 
            "value": "",
            "fileSize": "",
            "crc32": "",
            "md5": ""
        },
        {
            "key": "chirpstack_client",    // 
            "value": "",
            "fileSize": "",
            "crc32": "",
            "md5": ""
        },
        {
            "key": "chirpstack_key",    // 
            "value": "",
            "fileSize": "",
            "crc32": "",
            "md5": ""
        },
        {
            "key": "rens_addr",    // 
            "value": ""
        },
        {
            "key": "rens_port",    // 
            "value": 18883
        },
        {
            "key": "everynet_name",
            "value": ""
        },
        {
            "key": "everynet_pwd",
            "value": ""
        },
        {
            "key": "everynet_reg",
            "value": "eu"
        },
        {
            "key": "everynet_band",
            "value": "eu868"
        },
        {
            "key": "loriot_addr",
            "value": ""
        },
        {
            "key": "loriot_up_port",
            "value": 1780
        },
        {
            "key": "loriot_down_port",
            "value": 1780
        },
        {
            "key": "linkwan_conf_file",
            "value": "",
            "fileSize": "",
            "crc32": "",
            "md5": ""
        },
        {
            "key": "net_id_mode",    // 
            "value": 0
        },
        {
            "key": "net_id_list",    // 
            "value": ""
        },
        {
            "key": "join_mode",    // 
            "value": 0
        },
        {
            "key": "join_list",    // 
            "value": ""
        },
        {
            "key": "eui_mode",    // 
            "value": 0
        },
        {
            "key": "eui_list",    // 
            "value": ""
        },
        {
            "key": "pkt_keepalive_intv",    // 
            "value": 10
        },
        {
            "key": "pkt_stat_intv",    // 
            "value": 30
        },
        {
            "key": "pkt_push_ms",    // 
            "value": 100
        },
        {
            "key": "beacon_period",    // 
            "value": 0
        },
        {
            "key": "expert_enable",    // 
            "value": ""
        },
        {
            "key": "expert_content",    // 
            "value": ""
        },
        {
            "key": "main_link",    //
            "value": 1
        },        {
            "key": "sec_link",
            "value": 0
        },
        {
            "key": "wan_protocol",
            "value": 1
        },
        {
            "key": "wan_dhcp_use_peer_dns",
            "value": 0
        },
        {
            "key": "wan_ip",
            "value": "192.168.23.150"
        },
        {
            "key": "wan_mask",
            "value": "255.255.255.0"
        },
        {
            "key": "wan_gw",
            "value": "192.168.23.1"
        },
        {
            "key": "wan_pppoe_name",
            "value": ""
        },
        {
            "key": "wan_pppoe_pwd",
            "value": ""
        },
        {
            "key": "wan_pppoe_inter",
            "value": 60
        },
        {
            "key": "wan_pppoe_retries",
            "value": 0
        },
        {
            "key": "wan_pppoe_dns",
            "value": 0
        },
        {
            "key": "wan_pri_dns",
            "value": "8.8.8.8"
        },
        {
            "key": "wan_sec_dns",
            "value": "223.5.5.5"
        },
        {
            "key": "wan_mtu",
            "value": 1500
        },
        {
            "key": "wan_nat",
            "value": 1
        },
        {
            "key": "cell_apn",
            "value": ""
        },
        {
            "key": "cell_name",
            "value": ""
        },
        {
            "key": "cell_pwd",
            "value": ""
        },
        {
            "key": "cell_auth",
            "value": 0
        },
        {
            "key": "cell_pin",
            "value": ""
        },
        {
        "key": "ap_enable",    //Enable WLAN AP mode.
            "value": 1
        },
        {
            "key": "ap_mode",
            "value": 0
        },
        {
        "key": "ap_broadcast",   //Enable SSID broadcast.
            "value": 1
        },
        {
            "key": "ap_ssid",
            "value": ""
        },
        {
            "key": "ap_auth",
            "value": 5
        },
        {
            "key": "ap_pwd",
            "value": "iotpassword"
        },
        {
            "key": "sta_ssid",
            "value": ""
        },
        {
            "key": "sta_bssid",
            "value": ""
        },
        {
            "key": "sta_encryp",
            "value": 0
        },
        {
            "key": "sta_user",
            "value": ""
        },
        {
            "key": "sta_key",
            "value": ""
        },
        {
            "key": "system_name",
            "value": ""
        },
        {
            "key": "system_new_pwd",
            "value": ""
        },
        {
            "key": "timezone",
            "value": 127
        },
        {
        "key": "time_sync_type",   //Select Sync type as Sync with NTP Server.
            "value": 0
        },
        {
            "key": "ntp",
            "value": "pool.ntp.org"
        },
        {
            "key": "set_data",
            "value": ""
        },
        {
            "key": "set_time",
            "value": ""
        },
        {
        "key": "http_enable",   //Enable HTTP service.
            "value": 1
        },
        {
        "key": "http_port",    //Set HTTP port as 80.
            "value": 80
        },
        {
        "key": "https_enable",   //Enable HTTPS service.
            "value": 1
        },
        {
        "key": "https_port",   //Set HTTPS port as 443.
            "value": 443
        },
        {
        "key": "telnet_enable",   //Disable Telnet service.
            "value": 0
        },
        {
        "key": "telnet_port",   //Set Telnet port as 23.
            "value": 23
        },
        {
        "key": "ssh_enable",   //Disable SSH service.
            "value": 0
        },
        {
        "key": "ssh_port",     //Set SSH port as 22.
            "value": 22
        }
    ]
}