Configure Devices Individually
For devices that support auto provision, you can decide whether to enable auto provision and configure all settings within the Profile template. This topic describes how to configure devices individually through Milesight Development Platform.
Restrictions
ONLY devices that meet the following requirements can be configured on Milesight
Development Platform:
- Support auto provision (for Internet accessible devices)
- Connectivity status is NOT Offline or Banned
Procedure
- Log in to Milesight Development Platform.
- On the top bar, select the Device tab.
- In the Operation column of the desired device, click .
- In the Auto Provision After Adding field, decide whether to enable auto provision for this device.
- For Internet accessible devices:
- In the Generic Configuration tab, decide
whether to connect the device to Milesight platform for remote
management and configuration.
- Connect the device to Milesight Development Platform
- Retain the default settings.
- Connect the device to Milesight DeviceHub
- In the Connecting Platforms field, select DeviceHub 2.0.
- In the Milesight DeviceHub Server Address field, enter the server address of the Milesight DeviceHub.
- In the Basic Configuration tab, configure the device settings as needed.
- In the Generic Configuration tab, decide
whether to connect the device to Milesight platform for remote
management and configuration.
- For Internet inaccessible devices (For example LoRaWAN sensors), in the TSL Configuration tab, configure the device settings as needed.
- Click Save, and in the pop-up window click OK.
Result
The device configurations are updated successfully.
Note: for
some devices with sleep mode, the configurations will only updated when they are
waken up. For example, LoRaWAN class A type sensors.